GEFFEN intelligent cloud-controlled distributed po
GF-SPMS8

GEFFEN Power Manager Series GF-SPMS8 Rackmount 8-way Intelligent Power Controller, with 1 LAN interface, access network interface, let your device layout full of imagination. It can be used with programmable host or PC communication to realize the control of a variety of peripheral devices. For example, it is used to control lights, sound sequencers, electric screens, electric curtains and projectors and other peripheral power supplies.

GF-SPMS8 communicates with the central control host through LINK protocol or 232 communication protocol.
Through the principle of relay, the purpose of weak current control of strong current is achieved.
It is mainly used to control equipment switches, projector delay shutdown, electric screens, electric curtains, electric hanger lifting control, etc.
The built-in network control function is integrated with the WEB GUI interface, which can be controlled by various mobile devices at any time.




●Provide 1 LAN interface, convenient for network layout, use stable and reliable TCP protocol to transmit data, connect with the router through the network cable, and communicate with smart phones and tablets through the router.
●Provide 1 channel RS-NET network control interface, GF-SPMS8 can communicate with the programmable control host through RS-NET.
●Provide 1 channel RS-232 interface, which can be controlled by independent PC, and can realize communication control of multiple GF-SPMS8 at the same time.
●The node routing can realize a variety of outgoing methods such as lower wiring and side routing, which is beautiful and generous.
●DC24V power supply mode.
●8 independent node control interfaces, each with two interface options: normally open and normally closed.
●Comprehensive indication, support POWER power indication, ID network connection indication, receive data indication; Device ID supports 00-99, and the rotating ID switches to set the ID identity code.
●D CODE adjustable network ID to achieve RS-NET network communication with programmable control host.
●Built-in photoelectric isolation module, which can ensure the safety and reliability of the load and the host.
●Built-in RS-NET and RS-232 switching buttons.
●It can be freely controlled by the touch button of the panel, and the 3S has the function of power sequencer by pressing and holding the POWER_1 button.
 Product model                        GF-SPMS8
 Control mode

 8 independent switch control. It can be controlled via front panel buttons, RS-232, RS-485, LAN network communication (TCP/IP protocol)

 and via an external button panel.

 ID selection                                    Changing the ID of a device by rotating the dial code is used to distinguish between multiple power managers in the same system.
 Load capacity per lane AC250V/10A,DC30V/10A
 Standby power consumption 1.9W
 Operating power consumption 18W
 Weigh about 3.8KG

When the RS-485 interface of the intelligent cloud power management system is connected to the host, the wiring only needs to correspond to the Y and Z pins one by one.


The following table describes the wiring when connecting multiple external intelligent cloud power management systems:




GEFFEN is specialized in processinghigh definition video signals for years. wehave developed and produced a series ofpro video devices, including signalconverter, multi-viewer, optical fiberconverter, signal distribution amplifiersignal generator and matrix switcher, etc.
:Building 3, Baizhong Creative Park, No. 240 Shilian Road, Panyu District, Guangzhou,Guangdong,China
+86 13928186280(Same WeChat/Whatsapp account)
:+86 20-34702140
ADD:Building 3, Baizhong Creative Park, Xinqiao Section, Shilian Road, Panyu District, Guangzhou City   TEL:020-34702140
Geffen Maxtrix Control System Manufactory CN All Rights Reserved 粤ICP备2021023507号