The Geffen GEFFEN 2 fiber input board Xin-SF/2 is an uncompressed (lossless) fiber optic signal input card for the MIX matrix series. It has 2 optical fiber input interfaces, with single-mode module (UF-S) and multi-mode module (UF-M) two optical modules, single-mode fiber can transmit signals up to 1KM, multi-mode fiber can transmit signals up to 300M. Uncompressed technology (lossless).
● Support HDMI1.4 standard, single-mode module supports HDCP1.4 protocol, multi-mode module does not support HDCP protocol.
● The maximum support resolution is 4Kx2K, and it supports 1080P 3D signal.
● High transmission rate: 10.2Gbps, ports support hot swapping.
Fiber optic signal input card |
|||
input |
|||
Enter the signal |
2 fiber optic signals |
||
Enter the connector |
SPF Fiber Optic Module |
||
Fiber module type |
Single-mode, multi-mode |
||
routine |
|||
Maximum rate |
10.2Gbps |
data type |
DVI/HDMI |
temperature |
0℃~ +55℃ |
relative humidity |
10% ~ 90% |
Fiber optic modules |
|||
Module type |
Single-mode module (UF-S), multi-mode module (UF-N) |
||
Interface specifications |
LC interface |
||
Fiber optic signals |
Supports the highest transmission resolution of 4Kx2K |
||
Transmission distance |
300m (OM3 Multimode Fiber Optic Cable) |
||
2km (single-mode fiber optic cable, only single-mode module is supported) |
|||
Highest data rate |
10.2Gbit/s |
||
HDCP management |
Single-mode: Compatible with HDCP1.4 standard |
||
Multimode: Not HDCP compatible |