Fingerprint ID Power Timing Manager-Geffen Maxtrix Control System Manufactory CN

Fingerprint ID Power Timing Manager

GEFFEN8 fingerprint recognition power sequencer and 8 power outputs make your device layout imaginative. Using power sequencer, access to different switch sockets, you can realize from the pre-stage equipment to the post-level equipment, start the power supply one by one, and turn off the power supply on the contrary, effectively and uniformly manage and control all kinds of electrical equipment, avoid human error operation, reduce the instantaneous impact of the electrical equipment switch on the power supply grid, and ensure the stability of the power system. It is widely used in automatic control, TV broadcasting system, audio broadcasting, power facilities and other systems.

Detail
Specification

● Universal socket, in line with European and American standards. 2 front and rear panels, 8 controlled universal sockets
● Maximum input current: 30A
● Maximum output current of single channel: 10A
● Total power: up to 3500W
●The interval between each switch is 1 second, which can be controlled by a single channel, and one indicator can be controlled by one way
● Circuit board circuit: 60% high-purity tin, high-end shunt technology, strengthened and thickened
● There is a digital voltage display meter
● Air switch
● 1U chassis
● Filter: capacitive filtering

●The machine can set 1 to 2 administrators (the 1st or 2nd fingerprint), press and hold the setting button (SET) for 3S in the empty fingerprint status, the blue LED flashes, and enter the entry state: you can directly enter the first fingerprint (administrator);
Other fingerprints can only be entered after being authorized by the administrator. When the fingerprint is not recorded, press the finger and cannot unlock it (the red indicator will prompt).

● Add manager fingerprint: Press and hold the setting button for about 3 seconds, and release the button when the blue light flashes. If the data is successfully collected, a green light will flash to indicate that a data can be recorded, if it is not recorded well or fails, a red light will flash to remind that the collection is invalid, and a total of 6 to 10 successful collections are required. When you're done, the green light turns on to indicate that the fingerprint addition is complete. The blue light flashes during the whole process of fingerprinting (indicating the fingerprint entry status). Touching fingers requires multiple angles to collect, which is conducive to the expansion of the database and helps the sensitivity of judgment!

● Add member fingerprint: Add fingerprint when you already have a fingerprint: Trigger the setting button for about 3 seconds, and release the button after the blue light flashes. In this case, enter the administrator fingerprint (that is, the first one), and when the administrator fingerprint is entered correctly (the green light prompts), repeat the process in the first step to complete the fingerprint.  Delete a single fingerprint: In any mode, keep triggering the setting button for about 6 seconds, and release the button when the red light flashes. At this time, press the finger, if the fingerprint is a registered user, the green light will prompt and the user will be deleted. If the administrator touches the fingerprint and the recognition is valid, all fingerprints will be deleted.
● Delete all fingerprints: In any mode, keep triggering the setting button for about 10 seconds, and release the button after the blue light and red light flash at the same time. At this time, the administrator touches and presses the fingerprint, if the fingerprint recognition is normal, the green light is on, and all fingerprints are deleted.