DVI 1 point 32 splitter-Geffen Maxtrix Control System Manufactory CN

DVI 1 point 32 splitter
HDD-1:32

The HDD-1:32 DVI splitter is a multi-port digital video output with one DVI video input and 32 DVI video outputs. In multimedia application systems, multiple digital display terminals are often required to display the picture of the same DVI signal source. If a DVI source is configured for each display terminal, this not only increases the system cost, but also greatly reduces the reliability of the system. The DVI distributors from Geffen Electronics are designed to solve these engineering problems. The DVI splitter supports one DVI signal input and multiple DVI signal outputs. This device works with a DVI switcher and can also implement a switching/distribution function.

Detail
Specification

Support DVI-D signal.
It has good performance of broadband, high speed, high precision, high output current, low noise and low power consumption.
Support load connection indication.
Ordinary DVI cable @1920×1080×60 can be driven not less than 15m.
Use special driver chip to support long-term transmission.
There is an input signal indication.
International standard 2U chassis.
Unique EDID management.

Technical parameters

Basic

Bandwidth: 1.6GMhz (-3db) at full load

The timing standard meets the DVI1.0 standard specified by the DDWG

Coupling mode: 0.05o (RL=150Ω)

Differential Gain 0.05% (RL=150Ω)

Maximum propagation delay 5ns (±1)

The switching speed ≤ 180ns

Video

Signal Input-------

Signal type DVI-D

Interface DVI-D

The highest resolution is 1920*1080*60

The timing standard meets the DVI 1.0 standard specified by the DDWG organization

Connector Type DVI-D (DVI-D signal only)

Reception distance<7m@1920× 1080×60

Signal output-------

Signal type: DVI-D digital video signal

Interface DVI-D (DVI-D signal only)

Specifications

Power supply: AC180V~AC240V 50Hz, international adaptive power supply

Power≤ 35W

The working temperature is 0°C~40°C

Storage temperature: -20°C~85°C